Heartwarming Info About How To Check Keel Bolts
Remove each nut and carefully clean the threads and then lubricate to make sure that i am not applying torque to a nut that is corroded to the bolt.
How to check keel bolts. The only way to inspect this to drop the keel. Check for other more obvious leaks, including the plumbing, to eliminate them before. If the threads on the nuts show any signs.
Leaking keel bolts are a sure sign that all is not well, particularly with stainless steel. Unfortunately, the only other way to check them is to remove the keel. The keel is bolted right up against the canoe body of the hull, and the joint always moves a bit there, with rust resulting.
No rust in the body. However, before you pale in fear,. With cast iron keels, the impact is not absorbed as efficiently through the keel.
To inspect them, first make sure you can reach them all. Yes, it is possible to remove inspect and replace if needed your keel bolts while your boat is still in the water, but you have to do it one at the time!we f. Check for signs of stress crazing around the gelcoat where the keel joins the hull.
This is a nuisance, but harmless—unless water in the joint. You lay your palm across the joint. Replacing_keel_bolt_step_1 inspecting the keel bolt:
If there are leaks around the bolts but you are satisfied with the condition of the bolts, this can be stopped as a temporary. We where very lucky the keel bolt came lose very easily, and it was looking great! Not as difficult as it sounds.